Disk Mode
Disk Mode Functions
13-15
loading. The method you choose determines how the objects in the Þle will be ordered when
loaded into the bank.
Loading Individual Objects
Since Þles can contain over 3000 objects, it is often useful to load only a subset of the information
contained in a K2600 Þle. Sometimes, this capability is necessary even to be able to load certain
Þles, if the size of the ÞleÕs samples or data is greater than the K2600Õs internal RAM size.
You can select individual objects or groups of objects (samples, programs, keymaps, effects,
songs) for loading from within a single K2600 Þle.
The Load Object feature is accessible from within the Load File dialog. To activate it, scroll the
Þle list until you have highlighted the Þle that you wish to load objects from:
Dir:\||||||||||||Sel:0/6|||||Index:|||3|
|||||||||||||||||BASSDRMS|.K26||||426K||
|||||||||||||||||HIHATS|||.K26||||788K||
||||File|to|load:SAXES||||.K26|||2510K||
|||||||||||||||||TOMS|||||.K26||||301K||
|||||||||||||||||TOMS1||||.K26|||1400K||
|Total:|5037K||||XCYMB||||.K26|||1012K||
Select||Root||Parent||Open|||OK|||Cancel
Press Open to begin the Load Object dialog. (Note: The Þle must be in .KRZ, .K25, or .K26
format in order to load individual objects from it.) The K2600 then scans the Þle contents in
order to present a list of all of the objects in the Þle. Sometimes this procedure can take a few
moments, depending on how many objects are in the Þle. During this time, you will see the
following display:
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
Reading|file|SAXES.K26||[...]|||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
Select||Next|||Type|||Multi|||OK||Cancel
The soft buttons in the above display do not become active until the process of scanning is
Þnished. When this happens, the K2600 will display a list of the ÞleÕs objects, in the exact order
that they are stored in the Þle:
Func:LOAD|||||Sel:0/5|||||||||||Index:|1
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
Sample||200|Tenor|Sax1|||||||G|2S|||250K
Sample||201|Tenor|Sax2|||||||C|3S|||179K
Sample||203|Tenor|Sax3|||||||F#3S|||198K
Keymap||200|Tenor|Sax|||||||||||||||176|
Select||Next||Type|||Multi|||OK|||Cancel
To Next Page
Loading...
Need help?
General
