13-24

Disk Mode

Saving Files

You will see the following question after the current Þle being loaded is completed:

||||||||||||||||||||||||||||||||||||||||

Abort|the|load?|||||||||||||||||||||||||

||||||||||||||||||||||||||||||||||||||||

|||||||||||||||||||||||||||||Yes||||No||

It may be a good idea to practice using this method of aborting a multiple Þle load, so that when

the time comes that you accidentally select 100 Þles, you will remember how to abort the

process. This same method (of holding the Plus or Minus buttons down) is also used to abort

the Backup feature and the macro Þle load feature.

If you run out of object or sample RAM, you will have one opportunity to abort the load as

explained above. However, if you continue from that point you may end up seeing the same

error message ÒMemory is fullÓ for each Þle that you had selected. This can be a rather tedious

process, however it is still possible to abort out of this by holding down the Plus or Minus

button simultaneously while pressing Yes when you see the following question:

||||||||||||||||||||||||||||||||||||||||

Abort|this|partial|load?||||||||||||||||

||||||||||||||||||||||||||||||||||||||||

|||||||||||||||||||||||||||||Yes||||No||

More Load Function Enhancements

There are more features having to do with the Load function that are described later on in this

guide, such as loading macro Þles and loading AIFF Þles.

Saving Files

The Save button starts the process of saving from the K2600 to the currently selected device.

When you press the Save soft button on the Disk-mode page you will see the bank dialog:

||||||||||||||||||||||||||||||||||||||||

|||||Save|selection:200...299*||||||||||

||||||||||||||||||||300...399|||||||||||

||||||||||||||||||||400...499|||||||||||

||||||||||||||||||||500...599|||||||||||

Export|Macro||Object|NewDir||OK|||Cancel

Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910330 CHAP 13 User Manual

Questions and Answers: