To Next Page

To Previous Page

Disk Mode

Backup and Copy Functions

13-67

Backup and Copy Functions

File Backup

To access the Backup function from the Disk-mode page, Þrst make sure that the current disk is

set to be the disk that you want to back up. Next, press the Backup soft button:

Dir:\||||||||||||Sel:0/15||||Index:|||1|

||||||||||||||||||||||||||||||||||||||||

||Set|backup|dir:ANIMALS|.K26||||1097K||

|||||||||||||||||BREAKAGE||||(dir)||||||

|||||||||||||||||LOWINST|||||(dir)||||||

Total:9040K||||||PLANKTON||||(dir)||||||

|Root||Parent|Open|||||||||Current|Exit|

Select a directory to be backed up (see The Directory Selection Dialog on page 13-13). Backup

allows you to copy all of the Þles within a directory from one disk to another. All of the Þles

within the directory that you choose (plus all of its subdirectories and the Þles within them) will

be copied to the new disk. If you want to backup the entire disk, then make sure the current

directory is the root directory (as in the picture), and press Current.

Next, you will see a dialog for choosing the destination disk:

||||||||||||||||||||||||||||||||||||||||

||||Destination|disk:SCSI|0|||||||||||||

|||||||||||||||||||||SCSI|1|||||||||||||

|||||||||||||||||||||SCSI|2|||||||||||||

|||||||||||||||||||||SCSI|3|||||||||||||

|||||||||||||||||||||||||||||OK|||Cancel

Select the disk you wish to transfer Þles to. It must be different from the current disk.

Next, you can select a directory on the destination disk that will receive the transferred Þles.

||||||||||||||||||||||||||||||||||||||||

Use|default|directory|on|SCSI|0?||||||||

(Path|=|\)||||||||||||||||||||||||||||||

||||||||||||||||||||||||||||||||||||||||

|||||||||||||||||||||Change||OK|||Cancel

The default is always the root directory on the destination disk. Press OK to select the default.

To select a different directory, press Change.

Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910330 CHAP 13 User Manual

Questions and Answers: