13-40
Disk Mode
The Multiple Object Selector Page
Example: Clear
Suppose youÕre in Disk mode, and you want to save everything in RAM except programs.
1. Press the Save soft button to call up the Save dialog, then press the Object soft button.
2. Select the entire object list by pressing the Left/Right cursor buttons together.
3. Press Multi. Set the Select parameter to a value of Type/Range.
4. Set the value of Type to Program, and the value of Bank to All Banks.
5. Press Clear. The K2600 returns to the Save dialog. As you scroll through the object list,
youÕll notice that no programs are selected, and all objects that arenÕt programs are
selected.
Example: Set
Suppose you wanted to save all keymaps and samples in the 300s bank to a single Þle.
1. In Disk mode, press Save, then press Object.
2. Set the Select parameter to Type/Range, the Type parameter to Keymap, and the Bank
parameter to 300Õs.
3. Press Set. This selects all the keymaps in the 300s bank.
4. Press Multi again, change the Type parameter to Sample, and press Set again. Now all
keymaps and samples in the 300s bank are selected.
5. Press OK and continue with the Save operation.
To Next Page
Loading...
Need help?
General
