11
Style Control
3.
Sync Start
Press [SYNC] button to enter the sync start waiting
mode. The 4 beats on the LCD flash together.
If the A.B.C. mode is on, play any key in chord area,
the style start playing with bass and chord.
If the A.B.C. mode is off, play any key on keyboard, the
style plays only the drum voice.
Press [SYNC] button again to stop the style.
2.
“A.B.C.” mode
The default setting of A.B.C. is off.
Press [A.B.C./LESSON] button to turn on the auto bass
chord. The area to the left of split point is known as the
chord area.
When playing the chord, both the bass and the chord
voice sound.
1.
Start immediately:
Press [START/STOP] button to start the style, the drum
beats of the style will be played at once. The beats will
be shown on the LCD alternately.
STYLE
SONG
START /
STOP
SYNC
INTRO /
ENDING
FILL
STYLE
SONG
START /
STOP
SYNC
INTRO /
ENDING
FILL
Flash simultaneously
STYLE
SONG
START /
STOP
SYNC
INTRO /
ENDING
FILL
STYLE
SONG
START /
STOP
SYNC
INTRO /
ENDING
FILL
Intro Start:
4.
Press [INTRO/ENDING] button when the style is not
playing, NOR flag will flash on the LCD, indicating the
indicates the intro section is ready to play.
Press [START/STOP] button, then the style starts with
an intro section, followed by the main section.
SUSTAIN
DUAL
LOWER
DSP
A.B.C.
TOUCH
SUSTAIN
DUAL
LOWER
DSP
A.B.C.
TOUCH
Flashing
L & R
CHORD
DICT.
LESSON
SUSTAIN
DUAL
LOWER
DSP
A.B.C.
TOUCH
SUSTAIN
DUAL
LOWER
DSP
A.B.C.
TOUCH
Start a Style
0
5
25
75
95
100
aw_M5_Manual_G07_150326
2015325 18:15:04