Lower Voice / Split Point
The “DSP” flag lightens on the display.
9
2.
1.
NOTE:
When you step on the sustain pedal, the sustain effect
will be stronger than the effect by pressing [SUSTAIN]
This function allows you to perform the overall
sound in a realistic style.
The DSP Effect is set to ON when keyboard power
on.
1.
2.
2
3
4
5
6
7
8
9
0
NO
YES
1
FUNCTION
NOTE:
The default split key is F#3(19), Turn to “Function Menu”
page for more detail.
Press and hold down [FUNCTION] button at first,
effect. The “SUSTAIN” flag will disappear.
2
3
4
5
6
7
8
9
0
NO
YES
1
FUNCTION
1.
2.
Press and hold down [FUNCTION] button at first,
Press and hold down [FUNCTION] button at first,
then press [6] button to turn off the DSP effect.
The “DSP” flag will disappear.
2
3
4
5
6
7
8
9
0
NO
YES
1
FUNCTION
Press [+\YES] / [-\NO] button or number button to
select the voice you want. The default lower voice
number is “No.154 Synth Strings 3”.
3.
Press and hold down [FUNCTION] button at first,
LCD darkens its flag.
A.B.C.
TOUCH
DUAL
LOWER
DSP
SUSTAIN
A.B.C.
TOUCH
DUAL
LOWER
DSP
SUSTAIN
A.B.C.
TOUCH
DUAL
LOWER
DSP
SUSTAIN
Press and hold down [FUNCTION] button at first,
and its number.
P ress and hold down [FUNCTION] button at first,
then press [7] button to activate the sustain effect.
The “SUSTAIN” flag lightens on the display.
Th e lo w er v o ice fun c tio n is set to O FF w hen
keyboard p ower on.
You can play two sounds on different parts of the
keyboard. It is called “Split Mode”.
This function helps you to get a voice with a
sustained effect, while playing the keyboard.
The sustain effect is set to OFF when keyboard
power on.
then press [6] button to turn on DSP effect.
then press [4] button to turn on the LOWER VOICE,
then press [4] button to turn the LOWER VOICE.
off
LCD lights the “LOWER” flag and displays “VOICE L”
t h en press [7] button to eliminate the sustain effect.
Sustain
button.
Dsp Effect
0
5
25
75
95
100
aw_M5_Manual_G07_150326
2015325 18:15:03
To Next Page
Loading...
Need help?
General
