Kurzweil Mark Pro 2i - Introduction to Mark Pro 2 I; Mark Pro 2 I Rear Panel; Rear Panel Features

Mark Pro TWOi
5
Introduction to Mark Pro 2i
Mark Pro 2i Rear Panel
Figure 1-1 Mark PRO 2i rear panel
Rear Panel Features
Power Connector— AV 100~240 VAC 50/60Hz
Audio Connection – Balanced 1/4” left and right audio output jacks to connect to an amplifier,
mixer or sound system.
MIDI Connection – In, Thru/Out, and Out ports to connect the Mark Pro 2i to other MIDI
devices to receive, pass, and send MIDI data.
USB – Transmit/receive MIDI message over USB with host system(typically, PC).