Kurzweil Mark Pro 2i - Installation and Parts Check

Mark Pro TWOi
9
Figure 1-6 Mark PRO 2i Pedal
SUSTAIN — The Sustain pedal lets the notes ring on after the keys are released. Releasing
the pedal will silence the sustained notes.
SOSTENUTO — Press the sostenuto pedal while holding a note on the keyboard, and the
note will sustain as long as you hold the pedal. But all the subsequently play
notes will not be sustained.
SOFT — The soft pedal makes the volume softer when pressed. But it will not affect the
volume of notes that are already played.
Power On. Off.
Figure 1-7 Mark PRO 2i Power On & Off
The Mark Pro 2i is a free volt product which can be used both on 110V and 220V. You can
power this digital piano by plugging it into a standard household power outlet. Make sure the
power switch on the bottom surface of the keyboard is turned off before you connect the power
cord to the electrical outlet.
After connecting to the outlet, you may turn on the power switch located at the bottom left of the
keyboard. Check the main volume knob is fully down to the left. When the power switch is
turned on, the front panel lights up. In 3 seconds the Mark-Pro 2i is ready to play.