Kurzweil PC3 - Page 10

10
The MIDI Setup window will appear, displaying the available MIDI Port connection options on
your computer:
1. Your MIDI Setup window will likely show different MIDI Input and MIDI Output Port
information.
2. The Virtual MIDI Ports‟ tab only appears in the Macintosh version of SoundEditor.
In the MIDI Setup window, select the MIDI IN and OUT ports that the PC3 is connected to, and
set the MIDI Channel to match the MIDI channel on the PC3. Once the proper ports and MIDI
channel are selected, you should see the current PC3 software version at the top of the MIDI
Setup window as shown. This confirms that SoundEditor is communicating with the PC3.
After making the appropriate MIDI connections, click on the DONE button to dismiss the
window. You can safely ignore the MIDI In Controller and Virtual MIDI Ports tabs for now.
Information on the use and configuration of the MIDI In Controller and Virtual Ports is provided
in Appendix B.