12-14
Tutorial: Song Mode
7. Use the From and To parameters to set the range of time from which you want to remove your
volume automation. You can play the song and watch the Locate field to determine these times. For
this example, let’s say that we want to erase volume automation from bar 3 (see below.)
8. Press the Go soft button to delete the selected volume automation. A screen will appear reading
“Erase Operation Completed!” Press the OK soft button to return to the EditSong:TRACK page
(see below.)
9. Once back on the EditSong:TRACK page, press the Play/Pause button to hear the result. Next,
press the Exit button twice to return to the Song mode MAIN page. You will be presented with the
Song: Save Changes page, where you can decide whether or not to save the changes you have
made.
10. To re-record volume automation, follow the steps in Part 6 b, above.
To Next Page
Loading...
