What to do if Küschall Wheelchair parking brakes are gripping poorly?
If the parking brakes on your Küschall Wheelchair are gripping poorly or asymmetrically, it could be due to: * Incorrect tire pressure in one or both rear tires. Make sure to correct the tire pressure. * Parking brake setting incorrect. In this case, correct the parking brake setting.
Why Küschall Wheelchair does not travel in a straight line?
Your Küschall Wheelchair might not travel in a straight line due to several reasons: * Incorrect tire pressure on one rear wheel. In this case, correct the tire pressure. * One or more spokes broken. If this is the case, replace the faulty spokes. * Spokes tightened unevenly. Therefore, tighten loose spokes. * Front wheel supporter is not aligned correctly. Correct the position and alignment of front wheel supporter. * Front wheel bearings are dirty or damaged. Clean or replace the bearings. * Rear wheels are off track. Change the track. * Front wheels not adjusted to same height. Position the front wheels such that they touch the floor at the same time.
How to fix a Küschall Wheelchair that is very difficult to unfold?
If your Küschall Wheelchair is very difficult to unfold, the backrest cover might be too tight. Try to loosen the Velcro bands of the backrest cover a little.
What causes the front wheel of my Küschall Wheelchair to be stiff?
If the front wheel of your Küschall Wheelchair is stiff or stuck, the bearings may be dirty or faulty, which a specialist should clean or replace.
Why does my Küschall Wheelchair tip backwards too easily?
If your Küschall Wheelchair tips backwards too easily, the rear wheels may be mounted too far forwards. A specialist should mount the rear wheels further back. Also, the back angle or seat angle might be too large, which a specialist should adjust.
Why do the front wheels wobble when my Küschall Wheelchair is moving fast?
If the front wheels of your Küschall Wheelchair wobble when moving fast, it could be due to too little tension in the front wheel bearing block. You can try to tighten the nut on the bearing block axle slightly. Another cause may be a worn front wheel, which a specialist should change.
What to do if the brakes are gripping poorly on my Küschall Wheelchair?
Poor or asymmetrical brake gripping on your Küschall Wheelchair can be caused by incorrect tire pressure in one or both rear tires. You should correct the tire pressure. Also, the brake setting may be incorrect, in that case consult with a specialist to correct the brake setting.
How to fix a Küschall Wheelchair that does not travel in a straight line?
If your Küschall Wheelchair isn't traveling straight, it might be due to incorrect tire pressure on one rear wheel. Make sure to correct the tire pressure. Also, check for broken or unevenly tightened spokes, which would require a specialist. Another cause may be dirty or damaged front wheel bearings, which a specialist should clean or replace.
General| Foldable | Yes |
|---|---|
| Frame Material | Aluminum |
| Category | Wheelchair |
| Type | Manual |
| Wheel Size | 24 inches |
| Seat Width | 36 - 51 cm (14 - 20") |
Covers essential safety warnings and precautions for product use, handling, and stability.
Defines the purpose of the wheelchair, intended users, and limitations.
Describes the Compact SA and Compact FF models and the importance of professional configuration.
Explains the function of parking brakes and warns about sharp braking while moving.
Explains unhinging, hinging, adjusting height, and swivelling the leg rests.
Describes the anti-tipper function, warnings, and activation/deactivation procedures.
Explains the purpose of the posture belt and critical safety warnings regarding its fit.
Describes the tipper aid for navigating obstacles and associated overturning risks.
Details operation, adjustments, and calf pad/foot plate settings for swing-away leg rests.
Explains how to adjust, remove, and install the amputee support and associated risks.
Describes the dual handrim system, its usage, and safety precautions.
Covers general safety precautions, tyre pressure, wheel selection, and handrim use during operation.
Explains how to brake the wheelchair while moving and details risks associated with braking.
Provides safe step-by-step instructions for entering and exiting the wheelchair.
Guides users on driving and steering the wheelchair using handrims and identifying the tipping point.
Details crucial safety procedures for transporting a user in a vehicle with restraint systems.
Covers safety risks related to improper securing of the wheelchair during transport.
Offers safety advice for identifying and repairing faults, recommending technician assistance.
Lists common faults, their possible causes, and recommended repair actions.
To Next Page
