KVC KP390 - Atmospheric Pressure and Vacuum Calibration Flow

16
KVC
16 http : // www.kvcins.com
press continuously
7-7 Atmospheric pressure and Vacuum calibration flow
+
Press at the same time
** Atmospheric pressure correction : The vacuum can only be calibrated in the range of 200 to 1200 Torr.
** Vacuum correction : It can only be calibrated if the vacuum level is 1.0E-2 or below.
( Calibrate compared to reference gauge )
SET
MODE
SET
MODE
▲ ▼
MODE
▲ ▼
VACUUM
At-M
Atmospheric
pressure
correction
vA-C
7.6 2
5.0-3
VACUUM
SM-d
Vacuum
correction
VACUUM
MODE
MODE
MODE
MODE
▲ ▼
SET
Adjust by ▲,▼
Adjust by ▲,▼