3
3 http : // www.kvcins.com
Make sure to turn on the power after checking the controller and the sensor are connected.
CONTENTS
1. PRODUCT OVERVIEW ------------------------------------------------------------------------------------------- (PAGE 5 )
2. STRUCTURE OF PRODUCT -------------------------------------------------------------------------------------- (PAGE 5 )
3. PRODUCT FEATURES -------------------------------------------------------------------------------------------- (PAGE 5 )
3-1 Range of vacuum measurement of product
3-2 Display state of product
3-3 Features and functions of product
4. NAMES OF PRODUCT PARTS ----------------------------------------------------------------------------------- (PAGE 6 )
4-1 Names of front parts
4-2 Connection diagram
5. PRODUCT SPECIFICATION ------------------------------------------------------------------------------------- (PAGE 8 )
5-1 Controller specification
5-2 Sensor specification
6. MAIN FUNCTIONS OF PRODUCT ------------------------------------------------------------------------------ (PAGE 9 )
6-1 Check feature setting and precautions
6-2 Set point function
6-3 Alarm high / low function
6-4 Dead band function
6-5 Analog output function
6-6 Initialization function
7. PARAMETER SETTING OF PRODUCT ------------------------------------------------------------------------ (PAGE 12 )
7-1 Setting method
7-2 Setting flow
7-3 Vacuum unit setting flow
7-4 Alarm high / low and Dead band setting flow
7-5 Set point setting flow
7-6 Analog output setting flow
7-7 Atmospheric pressure and Vacuum calibration flow
To Next Page
Loading...