Safety
5
General safety
information
Please read and ensure you understand the following general safety
information. Specific safety information is pointed out in the relevant
chapters.
General
Read and ensure you understand the instructions
Before starting to operate the plough, read the operating manual and
follow the instructions. Failure to follow the instructions may damage
the plough or lead to injury.
Qualified personnel only
Do not start using the plough unless the user has been properly
trained and is familiar with the operation and safe use of the plough.
Incorrect use of the plough may damage the plough or lead to injury.
Check for technical defects
Before starting to use the plough, check that the machine is in perfect
working condition. If there are any defective components, contact your
dealer to have them replaced. Defective components may cause mal-
functions, and damage the plough or lead to injury.
Keep distance
Do not stand on, under or near the plough when it is operating or being
coupled to the tractor. This may result in damage or injury.
Support the plough
Do not stand under or near the plough unless it is properly supported.
If the plough tips, it may damage the plough or lead to injury.
Lower the plough
Always lower the plough when parking the tractor. Otherwise, the
plough may lower itself and damage the plough or lead to injury.
Use front end weights
Fit the tractor with enough front end weights for stability and secure
steering.
Check the vicinity
Always check the immediate vicinity before starting to move or oper-
ate the plough. No persons must stand close to the plough when it is
being operated.
Use the parking stand
Use the parking stand when parking the plough. If the plough is not
correctly supported, it may tip over. This may damage the plough or
lead to injury.
No riding on the plough
Do not allow anyone to sit on the plough. This may result in damage
or injury.
To Next Page