9.DRIVE AND DRIVEN PULLEYS
9-11
Measure the clutch lining thickness.
Service Limit:
90cc/70cc: 2 mm (0.08 in)
50cc: 1 mm (0.04 in)
INSPECTION
Measure the driven face spring free length.
Service Limit:
90cc: 137.5 mm (5.5 in)
70cc: 92 mm (3.68 in)
50cc-4T: 90 mm (3.6 in)
50cc-2T: 92.8 mm (3.712 in)
Check the driven face for wear or damage.
Measure the driven face O.D.
Service Limit: 33.94 mm (1.3576 in)
To Next Page
Loading...
