KYMCO Mongoose 50-4T

12. FRONT WHEEL/FRONT BRAKE/FRONT
SUSPENSION/STEERING SYSTEM
12-8
FRONT BRAKE
REMOVAL
Remove the wheel hub. (See page 12-4)
Pull brake shoe plate out from steering
knuckle.
Disconnect the front brake cable from brake
cam lever and remove the brake shoe plate.
INSPECTION
Measure the front brake lining thickness
(A).
Service limit: 2 mm (0.08 in)
DISASSEMBLY
Remove return ring.
Remove the brake shoes.
ASSEMBLY
Reverse the “DISASSEMBLY” procedures.
Brake Cable
Brake Shoe Plate Brake Cam Leve
r
Return Ring
Brake Shoes
Keep oil or grease off the brake linings.
＊