KYMCO MXU 50 REVERSE - Page 65

3. INSPECTION/ADJUSTMENT
3-4
ATV 50
CLEAN AIR FILTER ELEMENT
Wash the element gently, but thoroughly in
solvent.
Squeeze the excess solvent out of the
element and let dry.
Apply the engine oil.
Squeeze out the excess oil.
CHANGE INTERVAL
More frequent replacement is required when
riding in unusually dusty or rainy areas.
Use parts cleaning solvent only. Neve
r
use gasoline or low flash point solvents
which may lead to a fire or explosion.
＊
Air Cleaner Elemen
t
Do not twist or wring out the foa
m
element. This could damage the foam
material.
＊
The element should be wet but not
dri
pp
in
g
.
＊