KYMCO MXU 700i User Manual

IDLE SPEED ADJUSTMENT
A diagnostic tachometer must be used for this
procedure.
1. Remove the seat.
2. Start the engine and warm it up for a few
minutes at approximately 1,000 to 2,000
r/min. Occasionally rev the engine to 4,000
to 5,000 r/min. The engine is warm when it
quickly responds to the throttle.
3. Connect the tachometer and set the idle to
the specified idling speed .
Specified idle speed:
1,400~1,600 rpm/min
NOTE:
136

KYMCO MXU 700i Specifications

General

Brand	KYMCO
Model	MXU 700i
Category	Offroad Vehicle
Language	English