KYMCO MXU 700i - Wheel Removal; Wheel Installation

WHEEL REMOVAL
1. Elevate the wheel by placing a suitable stand
under the frame.
2. Remove the nuts from the wheel.
3. Remove the wheel assembly.
WHEEL INSTALLATION
When reinstalling a wheel, tighten the wheel
nuts in a crisscross (rather than a circular)
pattern.
Be sure the tapered side of the wheel nuts (1)
face the wheel rim (2).
Be sure the tapered side of the wheel
nuts (1) face the wheel rim (2).
(1) Wheel nuts
(1)
(2)
OK
(1) Wheel nut (2) Wheel rim
144
(1)
Wheel nut torque:
Front: 61 N-m (6.1kgf-m, 43.9lbf-ft)
Rear: 61 N-m (6.1 kgf-m,43.9 lbf-ft)