KYMCO MXU 700i - Drive Select Lever Adjustment

Drive select lever adjustment
1. Turn the ignition switch is ON and make sure
the engine stop.
2. Remove 3 fasteners (1), then remove the left
side cover (2).
3. Loosen the locknuts (3) of rod (4). Shift the
gear to neutral by moving the shift lever
and/or turn the rod. (The neutral indicator
lamp comes on.)
46
(2)
(1) Fasteners
(2) Left side cover
(4)
(3) Lock nuts
(4) Rod
(3)
(1)