KYMCO MXU 700i - Engine Stop Switch

27
Engine stop switch
When the switch is in the RUN ( ) position, the
engine will operate. When the switch is in OFF
( ) position, the engine will not operate.
This switch is intended primarily as a safety or
emergency control, and it should normally
remain in the RUN ( ) position.
(3)
(3)Engine stop switch
If you stop your ATV by turning the engine stop
switch OFF ( ), be sure to turn the ignition
switch OFF to prevent battery discharge.
NOTE:
NOTE:
Your ATV may differ slightly in appearance
from the images in this manual.
NOTE:
Your ATV
may differ slightly in appearance
from
the images in this manual.