KYMCO MXU 700i - Headlight Beam Adjustment

HEADLIGHT BEAM ADJUSTMENT
It is advisable to have a KYMCO dealer make
this adjustment.
CAUTION:
149
DRIVE SHAFT BOOTS
Check the protective boots for holes or tears.
If any damage is found, have them replaced by a
KYMCO dealer
(1)
(1) Drive shaft boots
DOWN
UP
(1)
(1) Adjusting button
To adjust:
Turn the ignition switch at " " position and start
the engine.
Turn on the dimmer switch.
Adjust the headlight aim by turning the headlight aim
adjusting button.