34
DRIVE SELECT LEVER
page 46 ~ 47
The drive select lever is used to shift your ATV
into the low, high, neutral, reverse and park
positions. Refer to for drive select
lever adjustment and operation.
(1) Drive select lever
(R) Reverse
(P) Park
(L) Low
(H) High
(N) Neutral
Apply the rear brake and shift the shift lever
into P position before turning off the engine
when parking the vehicle on an incline if you
park on an incline with shift lever in H, L or R
position, vehicle weight will make it difficult to
shift into neutral.
NOTE:
(1)
(L)
(H)
(P)
(R)
(N)
To Next Page
Loading...
