KYMCO MXU400 - Page 15

KC0056A
4. Dry the ele ment.
5.
Put the element in a plastic bag; then pour in air
filter oil and work the oil into the el ement. Insert
the
forming spring into the element with the
closely wrapped end of the spring toward the open
end
of the ele ment.
2
CAUTION
KC147
2. Remove the foam filt er el ement from the ai r filter
housing a nd separa te th e foam eleme n t from the
spring.
KC148
A torn air filter element can cause damage to the ATV
engine
. Dirt and dust may get inside the engine if the
element
is torn. Carefully examine the element for
tears
before and after c l eaning it. Replace the element
with
a new one if it is torn.
6. Clea n any dirt or debris from inside the ai r clea ner.
Be
sure no dirt enters the carburetor (if equipped).
7.
Place the filter assembly in the air filter housing
making sure it is proper l y positioned and properly
seated
with the filter element straight i n the hous-
ing.
CAUTION
KC147
KC143
3. Fill a wash pan la rger than the element with a non-
flammable
clea ning solvent; then dip the el e-
ment
in the solvent and wash it .
Failure to properly seat and align the filter element
may
cause severe engine damage .
8. Install the air filter housing cover and secure with
the l ocking tabs.
KC143
2-5