3-43
3
KC325
7. Align the inner shift fork with the gear cluster and
with the inner washer in place, install the gear
cluster and inner shift fork. While holding the gear
cluster in place, install the washer, gear, and snap
ring.
MD1032
MD1198
8. Install the outer shift fork and the shift fork shaft.
MD1327
9. Install the input driveshaft.
MD1326
10. Install the washer, spacer, sleeve, and reverse idler
gear.
MD1357
11. Install the secondary and primary driveshaft
assemblies. Account for the bearing alignment
C-ring on the bearing boss next to the pinion gear.
NOTE: Align the bearing alignment pin on the
secondary output shaft.
MD1316
To Next Page
Loading...
