Basic Operation
3-7
Manual Zoom
Reduces or enlarges the original image in 1 %
increments between 25 and 400 % (25-200 % with the
document processor).
Follow the steps as below to use manual zoom.
1
Place the originals in the document
processor or on the platen and press
[Reduce/Enlarge].
2
Press [+] or [-] to change the displayed
magnification as desired.
You can also enter the magnification
directly using the numeric keys by
pressing [# keys] ([#-Keys]).
3
Press the Start key to start copying.
25 %
400 %
Ready to copy.
11x8
To Next Page