Need help?Do you have a question about the Kyocera DP-5100 and is the answer not in the manual?
General| Print Resolution | Up to 1200 x 1200 dpi |
|---|---|
| Processor Speed | 800 MHz |
| Standard Memory | 256 MB |
| Print Technology | Laser |
| Connectivity | USB 2.0 |
| Duplex Printing | Standard |
| Media Sizes Supported | Letter, Legal, A4, A5, A6, B5 |
| Max Memory | 1280 MB |
| PDL | PCL 5E |
The machine is equipped with a maintenance function which can be used to maintain and service the machine.
Describes the process of entering and executing maintenance mode.
Initializing to the factory-default setting.
Adjusting the leading edge timing and the center line.
Adjust the drum surface potential.
Sets high voltage except the main high voltage and outputs.
Adjust the developer bias values or set the high altitude mode.
Sets the machine operation and indication depending on the specification of the destination.
Adjusts the scan image margins.
Adjusting the scanner and DP automatically.
To Next Page