Kyocera ECOSYS FS-C8525MFP User Manual

2-11
Preparation before Use > Connecting Cables
Connecting USB Cable
The equipment can be connected with a USB cable and used as a printer in an environment where there is no network.
1
Power Off.
2
Connect the machine.
1 Connect the USB cable to the appropriate interface located on the left side of the body.
2 Connect the other end of the cable to the PC.
Connecting the Power Cable
Connect one end of the supplied power cable to the machine and the other end to a power
outlet.
IMPORTANT
Only use the power cable that comes with the machine.
Check that the indicators are off.

Kyocera ECOSYS FS-C8525MFP Specifications

General

Category	Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Standard Paper Capacity	500 sheets
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Memory	1 GB
Memory (Maximum)	2 GB
Connectivity	USB 2.0, Ethernet
Print Speed	25 ppm
Print Resolution	600 x 600 dpi
Copy Speed	25 copies per minute
Fax Resolution	400 x 400 dpi
Max Paper Capacity	1, 600 sheets
Operating Systems Supported	Windows, Mac, Linux
Type	Multifunction