Kyocera ECOSYS FS-C8525MFP User Manual

2-18
Preparation before Use > Installing Software
Installing Printer Driver in Macintosh
The machine's printer functionality can be used by a Macintosh computer.
1
Insert the DVD.
Double-click the Kyocera icon.
2
Display the screen.
Double-click either OS X 10.2 and 10.3 Only, OS X 10.4 Only or OS X 10.5 or higher
depending on your Mac OS version.
3
Install Printer Driver.
Install the printer driver as directed by the instructions in the installation software.
This completes the printer driver installation.
Next, specify the print settings. If an IP connection is used, the settings below are required. If a
USB connection is used, the machine is automatically recognized and connected.
NOTE
Installation on MAC OS must be done by a user logged on with administrator privileges.
When printing from a Macintosh computer, set the machine’s emulation to “KPDL” or “KPDL(Auto)”. For details about
the configuration method, refer to Printer on page 9-17.
If connecting by Bonjour, enable Bonjour in the machine's network settings. For details, refer to
Network on page 9-19.
In the Authenticate screen, enter the name and password used to log in to the operating system.
Double-click
Double-click
1
2

Kyocera ECOSYS FS-C8525MFP Specifications

General

Category	Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Standard Paper Capacity	500 sheets
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Memory	1 GB
Memory (Maximum)	2 GB
Connectivity	USB 2.0, Ethernet
Print Speed	25 ppm
Print Resolution	600 x 600 dpi
Copy Speed	25 copies per minute
Fax Resolution	400 x 400 dpi
Max Paper Capacity	1, 600 sheets
Operating Systems Supported	Windows, Mac, Linux
Type	Multifunction