5-30
Operation on the Machine > Handling Destination
Handling Destination
This section explains how to select and confirm the destination.
Specifying Destination
Select the destination using either of the following methods except entering address directly:
• Choosing from the Address Book
• Choosing from the External Address Book
For details on the External Address Book, refer to the following:
• Choosing from One Touch key.
• Choosing from the FAX
Choosing from the Address Book
Registering Destinations in the Address Book (page 3-18)
1
In the basic screen for sending, select the [Address Book] key.
2
Select the destinations.
1 [▲] [] key > [Address Book] > [OK] key
2 Select the destination.
Choosing from the Address Book (page 5-30)
Command Center RX User Guide
Choosing from the One Touch Key (page 5-32)
FAX Operation Guide
• You can set the machine up so that the address book screen appears when you select the [Send] key.
Default Screen (page 8-35)
• If you are using the products equipped with the fax function, you can specify the fax destination. Enter the other
party number using the numeric keypad.
For details on the External Address Book, refer to the following:
Command Center RX User Guide
When checking information of the destination, select [Menu] > [Details] > [OK] key
To Next Page
Loading...
