2NM/2NX/2NY/2NZ/2P0/2P6-1
1-3-16
(49) Panel lock information 0: OFF/1: Partial lock/2: Full lock
(50) USB information U00: Not installed/U01: Full speed/U02: Hi speed
(51) Paper handling information 0: Paper source unit select/1: Paper source unit
(52) Black and white printing double count
mode
0: All single counts
1: A3, Single count, Less than 420 mm (length)
2: Legal, Single count, 356 mm or less (length)
3: Folio, Single count, Less than 330 mm (length)
(53) Billing counting timing -
(54) Temperature (machine outside) -
(55) Relative humidity
(machine outside)
-
(56) Fixed assets number -
(57) Job end judgment time-out time -
(58) Job end detection mode -
(59) Prescribe environment reset
0: Off
1: On
(60) Media type attributes
1 to 28 (Not used: 18, 19, 20)
* : For details on settings, refer to
“Prescribe Commands Refer-
ence Manual.
Weight settings Fuser settings
0: Light 0: High
1: Normal 1 1: Middle
2: Normal 2 2: Low
3: Normal 3 3: Vellum
4: Heavy 1 Duplex settings
5: Heavy 2 0: Disable
6: Heavy 3 1: Enable
7: Extra Heavy
(61) Calibration information
1: Developer bias Vmag
2: Developer bias Vslv
(62) Sensor initial characterization -
(63) Calibration information -
(64) Calibration information -
(65) Calibration information -
(66) Calibration information -
(67) Calibration information -
(68) Calibration information -
(69) Calibration information -
(70) RFID information -
(71) RFID reader/writer version information -
(72) Maintenance information -
(73) Altitude 0: Standard
1: High altitude 1
2: High altitude 2
(74) Charger roller correction 1 to 5
No. Description Supplement
To Next Page
Loading...
Need help?
General
Weight and Dimensions
