EasyManuals Logo

Kyocera ECOSYS M3550idn Service Manual

Kyocera ECOSYS M3550idn
483 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #395 background imageLoading...
Page #395 background image
2NM/2NX/2NY/2NZ/2P0/2P6-1
2-2-1
2-2 Operati on of the PWBs
2-2-1 Upgrading the firmware
Follow the procedure to upgrade the firmware below.
Preparation
Extract the file that has the download firmware and store them in a USB memory.
NOTE: To improve Firmware Upgrade speed, a separate SKIP file can be added to the USB memory
with the Firmware Upgrade package. The Skip file will allow ONLY the Firmware that has been
Upgraded to a New Version to load, skipping duplicate Firmware Levels.
Procedure
1. Turn ON the main power switch and
confirm if the screen shows “Ready to
print” then, turn OFF the main power
switch.
2. Insert USB memory that has the firm-
ware in the USB memory slot.
3. Turn ON the main power switch.
4. About 10 seconds later, “FW-Update”
will be displayed (this shows that down-
loading is ready to start).
5. Confirm that upgrading is completed.
6. Confirm that the version of the firmware is
correctly displayed.
7. Turn off the main power switch by push-
ing it for 3 s continuously and remove
the USB memory.
Figure 2-2-1
Caution:
Never turn off the power switch or remove the USB memory during upgrading.
Safe-UPDATE
If the device is accidentally switched off or the USB memory is disconnected and upgrading was incomplete,
upgrading is retried when turning the main power switch on next time. Insert USB memory and turn the main
power switch on to perform steps 3 to 7 as the above.
* Controller Firmware
* Operation Panel Firmware *1
* Engine Firmware
* Option Language Data
* Dictionary Data *1
* Browser Data *1
* FAX Firmware
* PF (Paper Feeder) Firmware
*1: HyPAS model only
USB memory
USB memory
slot

Table of Contents

Other manuals for Kyocera ECOSYS M3550idn

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera ECOSYS M3550idn and is the answer not in the manual?

Kyocera ECOSYS M3550idn Specifications

General IconGeneral
Secure printingYes
Print technologyLaser
Maximum resolution1800 x 600 DPI
Duplex printing modeAuto
Time to first page (black, normal)8 s
Print speed (black, normal quality, A4/US Letter)50 ppm
Copier resize25 - 400 %
Maximum copy resolution600 x 600 DPI
Maximum number of copies999 copies
N-in-1 copy function (N=)2, 4
Scan toE-mail, FTP, SMB, USB
Scan driversTWAIN, WIA
Scanner typeADF scanner
Grayscale levels256
Maximum scan areaLegal (216 x 356) mm
Scan speed (black)60 ppm
Scan speed (color)40 ppm
Image formats supportedJPG, TIF
Document formats supportedPDF, XPS
FaxingMono faxing
Fax memory256 pages
Modem speed33.6 Kbit/s
Fax coding methodsJBIG, MH, MMR (Fax coding method), MR
Fax transmission speed3 sec/page
Digital sender-
Printing colorsBlack
Maximum duty cycle250000 pages per month
Number of print cartridges1
Page description languagesEpson LQ, IBM ProPrinter, Microsoft XPS, PCL 5c, PCL 6, PCL XL, PDF 1.7, PostScript 3
Processor model465S
Processor familyPowerPC
Card reader integratedNo
Maximum internal memory2048 MB
Sound power level (standby)23.6 dB
Sound pressure level (copying)52.6 dB
Sound pressure level (quiet mode)49.4 dB
Paper input typePaper tray
Total input capacity600 sheets
Total output capacity- sheets
Maximum input capacity2600 sheets
Total number of input trays2
Maximum number of input trays6
Multi-Purpose tray input capacity100 sheets
Auto document feeder (ADF) input capacity75 sheets
Custom media width70 - 216 mm
Maximum print size216 x 356 mm
Custom media length148 - 356 mm
Paper tray media typesEnvelopes, Plain paper
Paper tray media weight60 - 120 g/m²
Non-ISO print media sizesFolio
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
Auto Document Feeder (ADF) media weight50 - 120 g/m²
Control typeTouch
Product colorBlack, White
Display diagonal7 \
Market positioningBusiness
Cabling technology10/100/1000Base-T(X)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Standard interfacesEthernet, USB 2.0
Optional connectivityWireless LAN
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0 W
Power consumption (standby)71 W
Power consumption (PowerSave)2.4 W
Power consumption (average operating)777 W
Mac operating systems supportedMac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
CertificationTUV/GS, CE
Sustainability certificatesBlue Angel, ENERGY STAR
Harmonized System (HS) code84433100
Weight and Dimensions IconWeight and Dimensions
Depth455 mm
Width475 mm
Height590 mm

Related product manuals