6-26
Using Various Functions > Functions
File Name Entry
Adds a file name.
Additional information such as job number and date and time can also be set. You can check a job history or job status
using the file name, date and time, or job number specified here.
Enter the file name (
up to 32 characters), and select [Next].
To add date and time, select [Date and Time]. To add job number, select [Job No.]. To add both, select [Job No. & Date
and Time] or [Date and Time & Job No.].
Priority Override
Suspends the current job and gives a new job top priority.
The suspended job resumes after the other job is finished.
(Value: [Off] / [On])
• This function is not available if current job was an override.
• Priority override may not be available depending on the status of the current print job and memory usage.
Print from
USB
Print from
USB
To Next Page
Loading...
