11-6
Appendix > Optional Equipment
Optional Applications
The applications listed below are installed on this machine.
Starting Application Use
1
[System Menu/Counter] key > [System/Network] >
[Optional Function]
2
Select the desired application and select [Activate].
You can view detailed information on the selected application by selecting [ ].
3
Select [Official] and enter a license key.
Some applications do not require you to enter a license key. If the license key entry screen
does not appear, go to Step 4.
To use the application as a trial, select [Trial] without entering the license key.
4
Select [Yes] in the confirmation screen.
Application
Card Authentication Kit
ThinPrint Option
*1
*1 This can be used on a trial basis for a limited time.
• Restrictions such as the number of times the application can be used during the trial period differ depending on the
application.
• If you change the date/time while using the trial version of an application, you will no longer be able to use the
application.
If the user authentication screen appears, enter your login user name and login password
and select [Login]. For this, you need to login with administrator privileges. The factory
default login user name and login password are set as shown below.
Login User Name: 2600
Login Password: 2600
• If you started the Thin Print option and entered the license key, turn the power OFF/ON.
• Icons of activated application are displayed in the Home screen.
To Next Page
Loading...
