EasyManuals Logo

Kyocera ECOSYS M6530cdn User Manual

Kyocera ECOSYS M6530cdn
426 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
2-24
Installing and Setting up the Machine > Network Setup
Network Setup
Configuring the Wired Network
The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4),
TCP/IP (IPv6), NetBEUI, and IPSec. It enables network printing on the Windows, Macintosh, UNIX and other platforms.
Set up TCP/IP (IPv4) to connect to the Windows network.
Be sure to connect the network cable before configuring the settings.
Connecting LAN Cable (page 2-8)
For other network settings, refer to the following:
Network (page 8-26)
IPv4 setting
1
Display the screen.
[System Menu/Counter] key > [System/Network] > [Network] > [Wired Network Settings]
> [TCP/IP Setting] > [IPv4]
2
Configure the settings.
When using DHCP server
[DHCP]: Set to [On].
When setting the static IP address
[DHCP]: Set to [Off].
[IP Address]: Enter the address.
[Subnet Mask]: Enter the subnet mask in decimal representation (0 to 255).
[Default Gateway]: Enter the address.
[Auto-IP]: Set to [Off].
When using the Auto-IP, enter "0.0.0.0" in [IP Address].
NOTE
If user login administration is enabled, you can only change the settings by logging in with administrator privileges.
If user login administration is disabled, the user authentication screen appears. Enter a login user name and
password, and select [Login].
The factory default login user name and login password are set as shown below.
Login User Name: 2600
Login Password: 2600
IMPORTANT
After changing the setting, restart the network from System Menu, or turn the
machine OFF and then ON.
Restart Network (page 8-36)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera ECOSYS M6530cdn and is the answer not in the manual?

Kyocera ECOSYS M6530cdn Specifications

General IconGeneral
Secure printingYes
Print technologyLaser
Maximum resolution9600 x 600 DPI
Duplex printing modeAuto
Print resolution black600 x 600 DPI
Time to first page (black, normal)7 s
Time to first page (color, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)30 ppm
Copier resize25 - 400 %
Maximum number of copies999 copies
N-in-1 copy function (N=)2, 4
Time to first copy (black, normal)9.5 s
Time to first copy (color, normal)11.5 s
Scan toE-mail, FTP, SMB, TWAIN, USB, WIA
Scan driversTWAIN, WIA
Scanner typeADF scanner
Grayscale levels256
Maximum scan areaLegal (216 x 356) mm
Scan speed (black)40 ppm
Image formats supportedJPG, TIF
Document formats supportedPDF, XPS
FaxingColor faxing
Fax memory256 pages
Modem speed33.6 Kbit/s
Fax coding methodsJBIG, MH, MMR (Fax coding method), MR
Fax transmission speed3 sec/page
Digital sender-
Maximum duty cycle100000 pages per month
Page description languagesEpson LQ, IBM ProPrinter XL24E, Microsoft XPS, PCL 5c, PCL 6, PCL XL, PDF 1.7, PostScript 3
Wi-FiNo
Cabling technology10/100/1000Base-T(X)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Mobile printing technologiesApple AirPrint
Internal memory1024 MB
Processor familyPowerPC
Compatible memory cardsSD, SDHC
Maximum internal memory2048 MB
Sound power level (standby)38.6 dB
Sound pressure level (copying)48.7 dB
Sound pressure level (quiet mode)46.6 dB
Paper input typeCassette, Paper tray
Total input capacity350 sheets
Total output capacity250 sheets
Maximum input capacity1850 sheets
Total number of input trays2
Maximum number of input trays4
Multi-Purpose tray input capacity75 sheets
Auto document feeder (ADF) input capacity100 sheets
Custom media width70 - 216 mm
Maximum print size216 x 356 mm
Custom media length148 - 356 mm
Paper tray media typesPlain paper
Paper tray media weight60 - 163 g/m²
Non-ISO print media sizesFolio
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
Auto Document Feeder (ADF) media weight60 - 120 g/m²
DisplayLCD
Product colorBlack, White
Market positioningBusiness
Display number of lines5 lines
Standard interfacesEthernet, USB 2.0
USB 2.0 ports quantity3
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0.1 W
Power consumption (standby)57 W
Power consumption (PowerSave)2.1 W
Power consumption (average operating)502 W
Mac operating systems supportedMac OS X 10.5 Leopard
Other operating systems supportedAndroid, iOS
Sustainability certificatesENERGY STAR
CertificationTUV, GS, CE
Weight and Dimensions IconWeight and Dimensions
Depth558 mm
Width475 mm
Height616 mm

Related product manuals