8-36
Setup and Registration (System Menu) > System Menu
Restart Network
Primary Network (Client)
[System Menu/Counter] key > [System/Network] > [Primary Network (Client)]
Interface Block Setting
[System Menu/Counter] key > [System/Network] > [Interface Block Setting]
This allows you to protect this machine by blocking the interface with external devices such as USB hosts.
Security Level
[System Menu/Counter] key > [System/Network] > [Security Level]
Item Description
Restart Network Restarts the network.
This function is displayed when the wireless network function is available on the machine.
Item Description
Primary Network (Client) Specify the network to be used for the send function, the network authentication and
connecting to external address book.
Value: Wi-Fi, Wired Network
Item Description
USB Host This locks and protects the USB port (USB host).
Value: Unblock, Block
USB Device This locks and protects the USB interface connector (USB Device).
Value: Unblock, Block
USB Storage This locks and protects the USB memory slot.
Value: Unblock, Block
This function is available when USB Host is set to [Unblock].
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
Security Level Specify the security level.
Value
Low: This mode is used during maintenance. Do not use normally.
High: This is the security setting we recommend. Use this setting normally.
Very High: In addition to [High] setting, this setting disables the machine settings to be
changed from external command.