8-16
Setup and Registration (System Menu) > System Menu
Function Defaults
[System Menu/Counter] key > [Common Settings] > [Function Defaults]
Item Description
File Format Select the default type of the files to be sent.
Value: PDF, High Comp. PDF, TIFF, JPEG, XPS, OpenXPS
Original Orientation Set the original orientation defaults.
Value: Top Edge on Top, Top Edge on Left
Collate Set the defaults for Collate.
Value: Off, On
File Separation Select the default file separation setting.
Value: Off, Each Page
Scan Resolution Select the default scanning resolution.
Value: 600×600dpi, 400×400dpi Ultra Fine, 300×300dpi, 200×400dpi Super Fine,
200×200dpi Fine, 200×100dpi Normal
Color Selection (Copy) Set the default copying color mode setting.
Value: Full Color, Black & White
Color Select.(Send/Store) Select the default color mode for scanning documents.
Value: Full Color, Grayscale, Black & White
Original Image (Copy) Set the default original document type for copying.
Value: Text+Photo, Photo, Text, Graphic/Map, Printer Output
Original Image (Send/Store) Set the default original document type for sending/storing.
Value: Text+Photo, Photo, Text, Text (for OCR), Light Text/Line
[Text (for OCR)] is only available when "Color Selection" is set to [Black & White].
Background Density Adj.
(Copy)
Set the default Background Density (Copy).
Value: Off, Manual (Darker 5)
Background Density Adj.
(Send/Store)
Set the default Background Density (Send/Store).
Value: Off, Manual (Darker 5)
EcoPrint Select the EcoPrint default.
Value: Off, On
Skip Blank Page (Copy) Set the default Skip Blank Page (Copy) settings.
Value: Off, On
Skip Blank Page (Send/Store) Set the default Skip Blank Page (Send/Store) settings.
Value: Off, On
FAX TX Resolution
FAX Operation Guide
Zoom
Select the enlarged/reduced default when paper size/sending size changed after the originals set.
Value: 100%, Auto
Continuous Scan (Copy) Set the continuous scan (Copy) defaults.
Value: Off, On
Continuous Scan (FAX)
FAX Operation Guide
Continuous Scan (Send/Store)
Set the continuous scan (Send/Store) defaults.
Value: Off, On