10-32
Troubleshooting > Adjustment/Maintenance
Manual Correction
1
Load paper.
2
Display the screen.
[System Menu/Counter] key > [Adjustment/Maintenance] > [Color Registration] >
[Manual]
3
Print the chart.
Select [Print Chart].
A chart is printed. On the chart, for each of M (magenta), C (cyan) and Y (yellow), charts for
H-1 to 5 and V-1 to 5 are printed.
• Load the paper with the print side facing up.
• After removing new paper from its packaging, fan the paper before loading it in the
multipurpose tray.
Precaution for Loading Paper (page 3-2)
• Before loading the paper, be sure that it is not curled or folded. Paper that is curled
or folded may cause paper jams.
• Ensure that the loaded paper does not exceed the level indicator (see illustration
above).
• If paper is loaded without adjusting the paper length guide and paper width guide,
the paper may skew or become jammed.
To Next Page
Loading...
