8-46
Setup and Registration (System Menu) > System Menu
Others
Protocol Settings
[Home] key > [...] > [System Menu] > [Network Settings] > "Network Settings" [Protocol Settings]
Configure protocol settings.
Item Description
LAN Interface
Specify the settings for the LAN interface to be used.
Value:
Auto, 10BASE-T Half, 10BASE-T Full, 100BASE-TX Half, 100BASE-TX Full, 1000BASE-T
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
SMTP (Email TX)
Email Settings (page 8-31)
POP3 (Email RX)
POP3 (page 8-31)
FTP Client (Transmission)
FTP Settings (page 8-31)
FTP Server
(Reception)
Protocol
Settings
Select whether to receive documents using FTP.
*1
Value: Off, On
Available
Network
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
SMB Client (Transmission)
SMB Settings (page 8-31)
NetBEUI Protocol
Settings
Selects whether to receive documents using NetBEUI.
*1
Value: Off, On
Available
Network
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
WSD Scan
WSD Scan (page 8-32)
WSD Print
WSD Print (page 8-32)
To Next Page
Loading...
