Kyocera ECOSYS MA4500ix - Page 396

8-47
Setup and Registration (System Menu) > System Menu
ThinPrint Protocol
Settings
Select whether to use ThinPrint. To use the Thin Print protocol, set the protocol to
[On]. The default port number is 4000.
*1*2
Value: Off, On
NOTE
This function is displayed only when the optional ThinPrint Option is activated.
Thin Print over
TLS
To use the Thin Print over TLS protocol, set [Thin Print Over TLS] and [TLS] to
[On].
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for TLS. The default certificate is
the self-certificate of the machine.
Command Center RX User Guide
Available
Network
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
LPD Protocol
Settings
Selects whether to receive documents using LPD.
*1
Value: Off, On
Available
Network
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
Raw Protocol
Settings
Select whether to receive documents using Raw Port.
*1
Value: Off, On
Available
Network
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
IPP Protocol
Settings
Selects whether to receive documents using IPP. To use the IPP protocol, set [IPP]
to [On], and set [TLS] to [Off]. In addition, select [Not Secure (IPP&IPPS)] on IPP
Security under Security Settings from the Command Center RX. The default port
number is 631.
*1
Value: Off, On, 1 to 32767 (Port Number)
Available
Network
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
IPP over TLS Protocol
Settings
To use the IPP protocol, set [IPP] and [TLS] to [On]. The default port number is
443.
*1*2
Value: Off, On, 1 to 32767 (Port Number)
NOTE
When selecting [On], it also requires a certificate for TLS. the default certificate is
the self-certificate of the machine.
Command Center RX User Guide
Available
Network
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
Item Description