Kyocera ECOSYS P5021cdn - Network Settings

6-13
Setup and Registration (System Menu) > System Menu
Network Settings
[Menu] key > [▲] [▼] key > [Network Settings] > [►] key
Configure network settings.
Item Description
Communication
*1
Select the network to be used for the send function and the network authentication.
Value: Wi-Fi, Wired Network
SSL Server Select whether to use SSL.
Value: Off, On
IPSec Select whether to use IPSec.
Value: Off, On
Bonjour Select whether to use Bonjour.
Value: Off, On
NOTE
This function is displayed when TCP/IP is set to [On].
Wi-Fi Direct
*1
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Bonjour] is set to [On].
Wi-Fi
*1
Wired Network
NetBEUI Selects whether to receive documents using NetBEUI.
*2
Value: Off, On
Wi-Fi Direct
*1
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [NetBEUI] is set to [On].
Wi-Fi
*1
Wired Network
SNMPv3 Select whether to communicate using SNMPv3.
*2
Value: Off, On
Wi-Fi Direct
*1
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [SNMPv3] is set to [On].
Wi-Fi
*1
Wired Network
FTP(Server) Select whether to receive documents using FTP.
*2
Value: Off, On
Wi-Fi Direct
*1
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [FTP(Server)] is set to [On].
Wi-Fi
*1
Wired Network