Kyocera FS-1025MFP User Manual

2-19
Preparation
Originals Not Supported by the Document Processor
• Soft originals such as vinyl sheets
• Transparencies such as OHP film
• Carbon paper
• Originals with very slippery surfaces
• Originals with adhesive tape or glue
• Wet originals
• Originals with correction fluid which is not dried
• Irregularly shaped (non-rectangular) originals
• Originals with cut-out sections
• Crumpled paper
• Originals with folds (Straighten the folds before loading. Failure to do so may cause the
originals to jam.)
• Originals bound with clips or staples (Remove the clips or staples and straighten curls,
wrinkles or creases before loading. Failure to do so may cause the originals to jam.)
How to Load Originals
1 Adjust the original table size.
2 Load originals.
Put the side to be scanned face-up. Slide the leading edge into the document processor as
far as it will go.
IMPORTANT Before loading originals, be sure that there are no originals left on the original eject table. Originals left
on the original eject table may cause the new originals to jam.
Note Ensure that loaded originals do not exceed the level indicator. Exceeding the
maximum level may cause the originals to jam (see the figure).
Confirm that the original width guides exactly fit the originals. If there is a gap,
readjust the original width guides. The gap may cause the originals to jam.

Kyocera FS-1025MFP Specifications

General

DVD/CD printing	No
Duplex printing	Yes
Print technology	Laser
Time to first page (black, normal)	7.5 s
Print speed (black, normal quality, A4/US Letter)	25 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
N-in-1 copy function (N=)	2, 4
Time to first copy (black, normal)	13 s
Scan to	USB
Grayscale levels	256
Maximum scan area	Legal (216 x 356) mm
Scan speed (black)	18 ppm
Scan speed (color)	6 ppm
Image formats supported	BMP, JPG, PNG, TIF
Document formats supported	PDF
Faxing	Mono faxing
Printing colors	Black
Maximum duty cycle	20000 pages per month
Number of print cartridges	1
Paper input type	Cassette
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	251 sheets
Maximum print size	216 x 356 mm
Duplex media weight	60 - 120 g/m²
Paper tray media types	Plain paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Display	LCD
Product color	Black, Grey
Market positioning	Business
Display number of lines	2 lines
Standard interfaces	Ethernet, USB 2.0
Mobile printing technologies	Not supported
Processor family	ARM
Sound power level (standby)	29 dB
Sound pressure level (copying)	50 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (PowerSave)	3 W
Power consumption (average operating)	342 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	361 mm
Width	390 mm
Height	362 mm