Kyocera FS-1025MFP

2-50
Preparation
Device Defaults Tab
1 2
3
4
5
7
8
9
11
14
12
10
6
13
15
16
No. Item Description
1 Power off timer Select the length of time before the machine shuts off automatically when not in use.
The default preset time is 1 hour.
Value: 1 to 6 hours, 9 hours, 12 hours, 1 day to 1 week
Also, selects whether or not to turn the power off automatically when the USB is
connected, when the Network is connected and when the FAX is installed.
Note FAX is installed only appears on the FS-1120MFP, FS-1125MFP, FS-1320MFP
and FS-1325MFP. If using FS-1120MFP/FS-1125MFP/FS-1320MFP/FS-1325MFP,
note that turning the machine off at the power switch disables fax transmission and
reception.
Network is connected only appears on the FS-1025MFP, FS-1125MFP and
FS-1325MFP.
2 Auto sleep Set the sleep timer for the machine to go into sleep mode when not in use. The default
preset time is 1 minute.
Value: 1 to 240 minutes (1 minute increments)
3Quiet mode Turn on Quiet Mode. Refer to Quiet Mode on page 1-4.
4Units Select Inches or Millimeters for the unit for paper dimensions.
5 Print density Adjust density using 5 levels.
Value: Light, Medium light, Normal, Medium dark, Dark