Kyocera FS-1035MFP - Page 317

8
8-123
Default Setting (System Menu)
8 Press the OK key. TCP/IP appears.
9 Press the U or V key to select [On] and then press the
OK key.
Completed. is displayed and the screen returns to the
TCP/IP Settings menu.
10 Press the U or V key to select [IPv4 Setting].
11 Press the OK key. The IPv4 Setting menu appears.
12 Press the U or V key to select [DHCP].
13 Press the OK key. DHCP appears.
14 Press the U or V key to select [On] or [Off] and then
press the OK key.
Completed. is displayed and the screen returns to the
IPv4 Setting menu.
TCP/IP: a b
1 Off
*********************
2 *On
TCP/IP Settings: a b
1 TCP/IP
*********************
3 IPv6 Setting
[ Exit ]
2 IPv4 Setting
IPv4 Setting: a b
*********************
2 Bonjour
3 IP Address
[ Exit ]
1 DHCP
DHCP: a b
1 Off
*********************
2 *On