To Next PageTo Next PageWhy does my Kyocera Printer paper often jam?
Paper jams in your Kyocera Printer can occur due to several reasons. Ensure the paper is loaded correctly. If it is a supported type and in good condition, try removing it, turning it over, and reloading it. Replace any curled, folded, or wrinkled paper with new paper. Also, check for and remove any loose scraps or jammed paper inside the machine.
What to do if my Kyocera Printer cannot print?
If your Kyocera Printer isn't printing, first ensure that the power cord is plugged into an AC outlet and the power switch is turned on. Check that the printer cable is securely connected and that the machine was powered on after connecting the cable. If the print job is paused, press the Resume key. Finally, if an error message is displayed, follow the corresponding procedure.
How to clean Kyocera Printer dirty printouts?
If your Kyocera Printer produces dirty printouts, the platen or document processor might be dirty. Clean the platen or the document processor to resolve this issue.
What to do if Kyocera Printer ejects blank sheets?
If your Kyocera Printer is ejecting blank sheets, make sure the originals are loaded correctly. When using the platen, place originals face-down and aligned with the slit glass. When using the document processor, place originals face-up.
What to do if my Kyocera Printer says paper jammed?
If a paper jam occurs in your Kyocera printer, the machine will stop, and the location of the jam will be indicated on the Message Display. Leave the machine on and follow the instruction to remove the jammed paper.
How to fix light printouts on Kyocera Printer?
If the printouts from your Kyocera Printer are too light, verify that the machine is not in Manual Density mode and select the correct density level if needed. Shake the toner container from side to side to evenly distribute the toner. If there's a message indicating the need for more toner, replace the toner container. Ensure the paper isn't damp and replace it if it is. Disable EcoPrint mode if it's enabled. Also, make sure the paper type setting matches the paper being used.
How to adjust darkness on Kyocera Printer printouts?
If the printouts from your Kyocera Printer are too dark, check if the machine is in Auto Density mode and set the correct density level. Also, verify if the machine is in Manual Density mode and select the correct density level.
How to fix Kyocera Printer operation panel not responding?
If the operation panel of your Kyocera Printer does not respond when the power switch is turned on, ensure that the power cord is plugged into an AC outlet.
Why are images skewed on my Kyocera Printer?
If images are skewed when using your Kyocera Printer, check that the originals are placed correctly. When using the platen, align them with the slit glass. When using the document processor, align the original width guides securely before placing the originals. Also, ensure the paper is loaded correctly by checking the position of the paper width guides.
Why are Kyocera Printer printouts wrinkled?
If the printouts from your Kyocera Printer are wrinkled or curled, the paper might be damp. Replace the paper with new paper.
General| Print Technology | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Duplex Printing | Yes |
| Paper Capacity | 250 sheets |
| Maximum Paper Size | A4 |
| Connectivity | USB 2.0, Ethernet |
| Functions | Print, Copy, Scan, Fax |
| Warm-up Time | 20 seconds |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Scan Type | Flatbed, ADF |
| Fax Transmission Speed | 33.6 kbps |
| Modem Speed | 33.6 kbps |
| Standard Input Capacity | 250 sheets |
| Maximum Input Capacity | 800 sheets |
| Standard Output Capacity | 150 sheets |
| Standard Interfaces | USB 2.0, Ethernet |
| Ethernet LAN | Yes |
| Product Colour | White |
| Dimensions | 494 x 430 x 448 mm |
| Print Speed | 35 ppm |
| Copy Speed | 35 cpm |
| Standard Paper Tray Media Types | Plain, Recycled |
| Memory | 512 MB |
