Operating Keys and Indicators
If the number of pages to be printed is set to 2 or more, when printing starts, the
lower line of the message display shows the number of printed pages/set num-
ber of pages to be printed.
For more details on operation procedures, see the Operation Guide containded as a PDF file in the Kyocera Mita
Digital Library CD-ROM supplied with the printer.
Printed in China
5KKTA93E++AA 1001TI/SG
Indicator Name Description
Ready
indicator
Flashing: Indicates when an error occurs that you can
clear by yourself.
Lit: Indicates that the printer is on-line. Printing is possi-
ble.
Off: Indicates that the printer is off-line. Data can be
received but will not be printed. Also indicates when print-
ing is automatically stopped due to occur-rence of an error.
Data
indicator
Flashing: Indicates data transfer is taking place.
Lit:Indicates either that data is being processed, or that
data is being written to the memory card.
Attention
indicator
Flashing: Indicates when the printer needs maintenance
attention or the printer is warming up ( Please wait ).
Lit: Indicates when a problem or an error occurs that you
can clear by yourself.(For example, paper jam occurs.)
Message Display Name Description
INTERFACE
Interface
indicator
The interface indicator shows which of the printer's
interfaces is currently active. The default is no selection
( --- ).
SIZE
Paper size
indicator
Indicates the paper size of the current paper cassette.
The default is A4 ( A4 ) size.
TYPE
Paper type
indicator
Indicates the paper type of the current paper cassette.
The default is PLAIN.
Key Function
• Switches the printer on-line and off-line.
• Prints and feed out one page.
Abandons a printing job, resets numeric values, or cancels a setting procedure.
• When pressed during mode selection, terminates the setting and returns to the Ready condition.
• Used to select the emulation, font, character code set; to read an memory card and others.
Lets you access the desired item or enter numeric values. In some of the control procedures, the
and keys are used to enter or exit the sub items.
Enables access to the desired item or entering of numeric values. In some of the control procedures,
the and keys are used to enter or exit the sub items.
Used as the < key in the mode selection function.
• Used as the > key in the mode selection function.
• Displays online help messages on the message display when paper jam errors occur.
Finalizes numeric values and other selections.
CANCEL
MENU ENTER
READY
INTERFACE SIZE TYPE
DATA ATTENTION
GO
READY
DATA
ATTENTION
GO
CANCEL
MENU
ENTER
Operator Panel
To Previous Page
Loading...
