Kyocera FS-1800+ User Manual

FS-1800(+), FS-1900, FS-1920, FS-3800,
FS-3820 & FS-3830 Toner Replacement
The TK-60 (TK-50 for FS-1900, TK-55 for FS-1920 and TK-65 for FS-3820 and
the FS-3830) contains the following items:
• Toner container
• Waste toner bottle
• Wiper (lint-free) cloth
• Grid cleaner
• 2 plastic bags (for disposal of the old toner container and waste toner
bottle)
• Instructions
The initial toner kit supplied with the printer contains only the toner container and
a waste toner bottle.
1. Open the top cover all
the way.
2. To release an old toner
container from the printer
slide the green toner
release lever to the right.
3. Gently remove the old toner container from the printer, keeping it as
level as possible to avoid toner spillage.
4. Place the old container in the plastic bag supplied with the toner kit.
You can safely dispose of the toner cassette by putting it in the
rubbish bin.

Kyocera FS-1800+ Specifications

General

Type	Monochrome Laser Printer
Print Speed (Black, Normal Quality, A4/US Letter)	18 ppm
Print Resolution	1200 x 1200 dpi
Standard Output Capacity	250 sheets
Print Technology	Laser
Internal Memory	32 MB
Duplex Printing	Manual
Connectivity	Parallel
Paper Capacity	250 sheets
Standard Printer Languages	PCL6
Supported Operating Systems	Windows 2000

Summary

FS-1800(+) to FS-3830 Toner Replacement

Prepare and Remove Old Toner Container

Open printer, release, and carefully remove the old toner container, placing it in a disposal bag.

Install New Toner Container

Prepare the new toner container by shaking and removing the seal, then install it into the printer.

Replace Waste Toner Bottle

Open the side cover, remove the old waste toner bottle, and install the new one securely.