Need help?Do you have a question about the Kyocera FS-1920 and is the answer not in the manual?
General| Print Technology | Laser |
|---|---|
| Resolution | 600 x 600 dpi |
| Warm-up Time | 15 seconds |
| Time to First Page | 9 seconds |
| Processor Frequency | 200 MHz |
| Type | Monochrome Laser Printer |
| Supported Operating Systems | Windows, Mac OS, Linux |
| Connectivity | USB 2.0 |
| Memory | 32 MB |
| Output Capacity | 250 sheets |
General safety warnings and explanations of symbols used in the manual.
Explanation of warning, prohibition, and action symbols.
Step-by-step guide for unpacking and installing the printer.
How to access and navigate the printer's service mode menu.
Instructions for cleaning the paper transfer unit to maintain print quality.
Steps for removing and replacing the printer's developer unit.
How the printer indicates paper misfeeds and how to clear them.
Description of the printer's self-diagnostic capabilities and error categorization.
Table listing diagnostic codes, their causes, and corrective actions.
Solutions for issues causing blank or completely black printouts.
Guides for fixing problems like dots, streaks, and unsharpness.
Troubleshooting steps for waste toner box detection and paper jam issues.
Solutions for primary/secondary paper feed, skewed feed, and paper jams.
Safety measures and tool recommendations for disassembly and assembly.
Steps to remove and split the fuser unit.
Steps to remove the laser scanner unit from the frame.
Instructions for updating printer firmware via parallel interface or memory card.
Diagram showing components of the paper feeding system and paper paths.
Diagram illustrating the interconnectivity of paper feed components and engine board signals.
To Next Page
