Kyocera FS-1920 - Connect the Printer Cable and Power Cord

1-3-6
2FP/2FY/2FR
1. Connect the printer cable (parallel, USB or
network* interface).
*: For FS-3820N/3830N models only.
Figure 1-3-11
Connect the printer cable and power cord.
Figure 1-3-10
Paprallel
cable
USB cable
Network
(ether)
cable
Parallel
USB
Network*
*: FS-3820N/3830N
models only
2. Connect the power cord to AC inlet.
Power cord
AC inlet