Kyocera FS-1920 - Electrophotographic Cycle Explained; Overview of the Electrophotographic Cycle

2FP/2FY/2FR
2-1-6
2-1-2 Electrophotographic cycle
The electrophotographic system of the printer performs a cyclic action made of six steps as follows. Each step is
technically explained in the following sections.
Figure 2-1-6 Electrophotographic cycle
2 Exposure
3 Developing
6 Cleaning
1 Main charging
4 Transfer
5 Fusing
Drum unit
Laser scanner unit
Developer
Paper transfer unit
Fuser unit
Drum